The Gallagher access control system provides both flexibility and scalability enabling the security access system to be. Gallagher Command Centre. Find out how Gallagher's fully customizable Command Centre allows you to configure, manage and report on all aspects of your security system.

• Cardax Ft Controller 3000
• Fuel Systems

. Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre INT-CARDAX-D-Rev1. Copyright © 2013 Avigilon.

All rights reserved. No copying, distribution, publication, modification, or incorporation of this document, in whole or part, is permitted without the express written permission of Avigilon.

In the event of any permitted copying, distribution, publication, modification, or incorporation of this document, no changes in or deletion of author attribution, trademark legend, or copyright notice shall be made. Table of Contents Introduction. 1 Requirements. 1 Upgrading from Avigilon Control Center 4. 1 For More Information. 2 Installation.

3 Server. Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre Introduction The Avigilon Gallagher Integration allows the Gallagher Command Centre to utilize Avigilon surveillance technology. Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre For More Information For more detailed information about the procedures outlined in this guide, refer to the specific software documentation.

Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre Installation Server 1. Install the Gallagher Command Centre Server software. Install the Gallagher Controller API (FTCAPI) on the Gallagher Command Centre Server. Set the Gallagher Controller IP port. Refer to the “API Location” topic in the Gallagher Controller API Developers Guide. Verify that FTCAPI is installed correctly by running the FTCAPI test harness. It should start with no errors.

Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre Basic Configuration The basic configuration establishes the link between Avigilon servers and Gallagher servers. This allows the two servers to communicate. Adding an Integration User in Avigilon To protect the security of the Avigilon Control Center Server, add a user to the Avigilon software specifically for connecting to the integration. See the Avigilon Control Center Client User Guide for details about how to add users. Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre For example: 192.168.128.148:38880,administrator,password 5. Select the DVR Setup tab then complete the following fields: o Name/IP Address: enter the IP address for the Avigilon server that is licensed for the integration. O Username and Password: enter the same username and password that was used in the Configuration tab.

O In the Stored drop down list, select Avigilon Stored Video. Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre Complete the following fields: 7.

O Select a controller to associate with the Avigilon server. O In the Middleware PC Name/IP Address field, enter the name or IP address of the server that is running the FTCAPI.

O In the Identity area, give the Avigilon Site a Unique identity. Select the Event Response tab then select an Alarm Zone for all Events for the server. Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre Trigger and Acknowledge Avigilon Alarms from Gallagher Create alarms in the Avigilon Control Center Client software that can be managed by the Gallagher Command Centre software. Avigilon Alarm Configuration Set up alarms in the Avigilon Control Center Client before you configure Gallagher to manage all the alarms.

NOTE: The alarm name is case sensitive and must be unique to the server. Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre Configuring Gallagher to Trigger and Acknowledge Avigilon Alarms Configure the Gallagher Command Centre to manage Avigilon alarms.

The Gallagher Command Centre uses FTCAPI strings to send alarm triggers and acknowledgements to the Avigilon Control Center. In Gallagher Command Center, open the External Systems Master List Window. Right-click the camera associated with an alarm and select Properties.

Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre 8. Select the Messages tab. In the FT Controller API strings area, enter the alarm trigger information in the On field in the following format: alarmTrigger For example: alarmTrigger 192.168.128.162 burg alarm NOTE: The case sensitive alarm name is configured in the Avigilon Control Center Client. See Avigilon Alarm Configuration on page 7 for more information. Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre View Avigilon Image Data and Events in Gallagher Gallagher can be configured to view live and recorded video from Avigilon cameras, and receive Avigilon events. Gallagher associates recorded video with specific alarms, so you must configure an action plan in Gallagher before you can review recorded video in Gallagher.

Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre Gallagher Camera Setup 1. In the Gallagher Command Centre, open the External Systems Master List Window. Right-click the window and select New DVR System Camera. In the General tab, name the Avigilon camera. Select the Setup tab, and complete the following fields: o DVR System: select the Avigilon server the camera is connected to.

Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre If you are unable to watch live video and a symbol appears over the camera, the connection was unsuccessful. Confirm the following then test the connection again: o The camera is connected to the Avigilon Server it was assigned to in the Gallagher Camera Setup procedure. O The camera’s logical ID matches the Identification assigned to the camera during the Gallagher Camera Setup procedure. Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre Configuring and Viewing Recorded Video You can only view recorded video from Avigilon cameras when the cameras are part of a Gallagher alarm.

Gallagher alarms are generated from events with an action plan. Avigilon cameras must be added to an action plan to become part of a Gallagher alarm. Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre To assign an action plan to an event in Gallagher, see the Gallagher Command Centre Classic User Guide. Viewing Recorded Video Once an alarm is triggered by an event that includes an Avigilon camera action plan, recorded video can be viewed. NOTE: If an alarm is deleted, the event cannot be viewed.

In the Gallagher Command Center, open the Alarm Viewer. Right-click the alarm, then select View and select the camera. Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre 4. Select the Setup tab, and complete the following fields: o DVR System: select the Avigilon Site you want to receive system information from. O Identification: enter one of the following. Make sure the Identification is spelled exactly as listed or the system events will not be received by the Gallagher software.

ACC Server Events - for Avigilon Control Center Server events. Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre 3. In the Event Group list, select the External Event Group you want to edit. For a detailed list of the External Event Group ID assigned to each Avigilon event, see Appendix on page 18. In the Action Plan for External Event Group drop down list, select an action plan.

If you want to view the recorded video for a motion event, select an action plan that includes the Avigilon camera. Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre Troubleshooting If the following troubleshooting solutions do not resolve your issue, contact Avigilon Technical Support – Avigilon Gallagher Integration Fails After you install the integration, you are able to add the Avigilon server and cameras but all the devices are displayed as offline in the Gallagher software. Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre Appendix To change the way Gallagher handles each Avigilon event, change the action plan assigned to the Gallagher External Event Group ID. For more information, see Assigning Action Plans to Events in Gallagher on page 13.

Cardax Access Control Cardax FT Gallagher Command Centre Articles Page. Corporate Security Product Solutions Supplied and Managed by Gallagher Systems.

Protecting the best interests of your business and its personnel is quite a task in this day and age. Cardax access control is almost going to be a thing of the past and even though it’s about to be merged with another company, it is still a well recognised and respected brand when it comes to access control. Understanding the Benefits of Access Control, Even Your Visitors can be Controlled and Governed. The best security products for your business should be based on the individual needs of the premises that you are operating from. Employee and visitor management functionality is a great way to control who goes in and out of your offices. Information security integration services are often required when you need to secure all the data that is moving around your company at any given time.

Digital video security solutions are often state of the art and highly sophisticated equipment needs to be used in order to make the whole system more effective. The need for enhanced corporate security solutions in South Africa is becoming more prevalent. One of the many pitfalls business owners fail to take into account is monitoring. More specifically, the resources required to successfully monitor a security system. Technology has given us much in terms of security, especially access control systems which enables us to control who has access to, well, anything in our control really.

Visual cert exam manager 1.9.987. Through this latest version app you can make exam preparing with full concentration and in comfortable environment. High level managing authority can be used this version to manage and organize exams very rapidly. By using Visual Cert Exam Suit 3.4.2 Latest Version software you can create your own exam papers or insert your necessities. As a user friendly system it can facilitate you to look the properties or text selection that can be changeable by the name content. Overall a current present exam that displays by its primary windows allows you to look the text selection very easily.

‘Access control solutions’ has over the past few years become a buzz phrase in in-house corporate security circles. It refers to all the necessary measures taken to control access to various parts of a physical perimeter, and certain locations within the perimeter itself. The Cardax FT V5.20 released in April 2010 is one of the most advanced solutions for complete information security integration. Credential production is streamlined with the Gallagher Cardholder Enrolment Wizard. Gallagher is renowned for innovative and cutting edge technology solutions for security and risk management.

IDtek offers clients a range of advanced information security integration solutions from the Cardax FT, now Gallagher product stable. Cardax FT manufactured by Gallagher and installed by IDtek at client premises, also includes a dialler device that is attached to the Cardax controller for support of remote site monitoring and alarming of any intrusion. IDtek is the designer, installer and support provider of Gallagher security systems.

One of the benefits of using Gallagher products is the integrated approach followed to create optimal security. Early intrusion detection and alarming can make the difference between severe financial loss and catching of the perpetrators before large scale damage is done.

Cardax Ft Controller 3000

The Gallagher Command Centre is a Microsoft Windows based system that provides a company with an advanced and comprehensive security management tool. One of the most important security precautions that any business can take is to both limit and monitor the access to the business premises.

Fuel Systems

The ability of the Cardax access control system to provide a security and monitoring solution, as well as integrate with other security system is perhaps its greatest strength. Cardax FT makes extensive use of badging technology for access control. Designed, Installed and Supported by Powered by &.