Scope of this thread The scope of this thread is ONLY to discuss about SP Flashtool program - How to use Flashtool - Report Flashtool errors and how to fix it. Any other issues not related about Flashtool and its use should be posted in other specific thread. Please DON'T discuss here about specific device issues like - Where find ROM for a device - How to fix problem on device - etc - Flashtool hardware compatibily SP Flash Tool are for Smartphone products Mediatek MT62xx Familiy chips Mediatek MT65xx Familiy chips Mediatek MT67xx Familiy chips - Support resources - Mediatek USB/ADB driver To use Flashtool you should have installer Mediatek USB preloader driver. There are two types of USB driver for Mediatek devices. ADB USB driver for device working and switched on.

1. Sp Flash Tool Download For Windows 7
2. Android Sp Flash Tool

How to flash Mtk mt6572 Flash Tool Download with sp flash tool for free with usb cable windows 7,8,8.1,10 with all version google drive. How to flash Mtk mt6572 Flash Tool Download with sp flash tool for free with usb cable windows 7,8,8.1,10 with all version google drive. How to Cubot C6 MT6572 Flashing using SP FlashTool. This is a quick guide for Flash Cubot C6 MT6572 android. Download Latest version SP Flash Tool and Download.

Preloader USB driver to flash the device that is switched off. To use Flashtool, in the PC should be already installed the USB Mediatek Preloader driver. This the latest version of Mediatek driver. This is the all-in.one driver (include both USB ADB & preloader driver). Is not required to disable driver sign in Windows. The driver is compatible with all 32/64bit Windows OS's (from Windows XP to Windows 10).

How to install the USB ADB/Preloader driver - Disconnect the device from the PC. Download and decompress the archive.

Sp Flash Tool Download For Windows 7

Run the exe installer file (decompressed from archive) as administrator (right click - Run as administrator). Follow the instruction on video and wait the end of installation - At the end of installation close the installer and reboot the PC. Now the drivers are available for flash. Flashtool version The new version 5.xx include the support of new 64bit Mediatek CPU (MT67xx - ex.

MT6732/MT6752/etc) The new version 5.xx are also compatible with 32bit Mediatek CPU (MT65xx - ex. MT6582/6589/6592) and new 64bit Mediatek CPU (MT67xx - es. 5.x fixed a critical bug about SP Flash Tool 3.x where the SP Flashtool reads incorrectly the scatter file of some new mobile based on MTK6582 (error: recovery partition is not flashable).

Android Sp Flash Tool

Windows version Latest version - 5.1728 - Linux 64bit Latest version: 5.1728 - 'PMT Changed' error If you get an error like 'PMT Changed' (it means that partition scheme of current ROM and new ROM are different) and are you sure that the ROM is specific for your device you can use a special version of Flashtool 3.xx that bypass this error. Direct Memory Write To bypass a 'PMT changed' error (it means that the partition scheme described in the scatter of the new ROM is different than the ROM installed) there are two ways - If you have to flash the whole flash you can select in Flashtool the FIRWARE UPGRADE mode. If you have to flash single module/partition you can use Direct Memory Write. Read carefully before to continue!!! - Please follow the instructions carefully - The author of thread and xda forum will not take any responsibility on whatever may happen with your device.

Always make sure that you trust the sources of the ROM you download and know that it is meant for your phone. After flashing a wrong preloader, your phone will be completely dead (can't be powered on, it will not charge and won't be detected anymore by the computer) and there is no way to recover it. Instruction how to use Flashtool. Requirements.

USB data cable. MediaTek USB VCOM drivers.

SP Flash Tool Flashing the whole ROM. First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file ( MT6575Androidscatteremmc.txt or MT6577Androidscatteremmc.txt, depending on which phone you have) for your device and ignore any message that may appear. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone). Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear. After the red progress bar is complete, there will appear a purple progress bar. Right after the purple progress bar is complete, a message will appear underneath it: “ Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).

When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated. You can now safely disconnect your phone and turn it on. The process ends here.

Flashing only part of the ROM. In case you want to flash just one part of the ROM, that is also possible.

In the shown example, only recovery image will be flashed. Deselect all parts except the one(s) you want to flash and then press F9 (or hit Download button). The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue.

The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear. Please note that, even though it isn't mandatory to select it on the list of images to flash, preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode.